Milton-industries Filter 1037 (Coalescing) - Form 8X907 Manuel d'utilisateur télécharger pdf

4500 WEST CORTLAND STREET, CHICAGO, ILLINOIS 60639

Web Site Address: www.miltonindustries.com

.03 COALESCING FILTER INSTRUCTION SHEET

1/5/09 FORM NO. 8X907

BOWL Maximum Pressure Temperature Range

Metal 250 PSI 40°F to 160°F

Metal with Auto Drain 30 to 175 PSI 40°F to 120°F

INSTALLATION: lnstall filter so the air flow is in the direction of the

arrow on the head of the unit. Filter should be installed upstream of

regulators. If an air dryer is being used, install the filter downstream

from the dryer. A 40 micron pre-filter is recommended to greatly extend

the life of the coalescer element. When the coalescer element

becomes clogged with dirt, it must be replaced. If it is kept free from

dirt, it will coalesce oil indefinitely. A pre-filter will remove water and dirt

before it reaches the coalescer, and will reduce maintenance costs.

The coalescer filter is then free to remove oil, oil vapors and sub-

micron sized particles without prematurely clogging with large particles

of dirt and scale.

WARNING: Units are die cast aluminum, do not over torque when

installing. Also, pressurize unit slowly after installation of unit or

new element to avoid damage to element.

OPERATION ADJUSTMENTS: lf the filter is installed properly, it

should give long trouble-free service. The pressure drop across the

filter should not exceed 10 PSI. If the pressure drop exceeds 10 PSI,

either the filter element needs to be replaced or the unit is being

operated beyond its capacity and a larger size unit is required.

Operating the filter at a pressure drop in excess of 10 PSI will greatly

reduce the efficiency of the filter.

If oil appears downstream: 1) check downstream air lines to be sure

that they are free of residual oil; 2) check to see that the filter element

and 0-ring are in good condition and installed properly.

Warning! For compressed air service only. Not to be used on

life support or breathing air systems.

4500 WEST CORTLAND STREET, CHICAGO, ILLINOIS 60639Web Site Address: www.miltonindustries.com.03 COALESCING FILTER INSTRUCTION SHEET1/5/09 FORM NO. 8

Pas de commentaire

Milton-industries Filter 1037 (Coalescing) - Form 8X907 Manuel d'utilisateur